PPD Maintenance Manual
T1DA0502-002, Rev A
Page 16
6.1.8 Beeper
Period
The value of this parameter sets the frequency of the warning tone. The default value is 65
(2.5 kHz). The user may experiment to determine the desired setting.
6.2
Programming the Man-Down Module
The section describes the steps required to program the user configurable options of the Man-
Down Module. After the information is read from a connected PPD, select the Man-Down Menu
Item from the Transmitter Programmer main screen.
6.2.1 Access
Man-Down Feature Dialog
In the Upper left corner of the PPD Programming Software main screen is a pull-down menu
item labeled Man-Down. Click on this menu and then select the choice Program Man-Down
Module. The man-down programming dialog box will be displayed.
6.2.2 Entering
Parameters
Figure 6.2.2 shows the man-down module programming dialog box. Using the edit and pull-
down boxes, select the desired value for each of the programmable features. To reset to the
factory default settings for all values click on the button labeled Set to Factory Defaults.