Sensotec Rapidox 1100L Instruction Manual Download Page 39 | Manualshive

Page: 39 / 49

Sensotec Rapidox 1100L Instruction Manual Download Page 39

Cambridge Sensotec Rapidox 1100L Oxygen Analyser Instruction Manual

in the top right box labelled ‘O2 Axis’. Note that the zoom function is disabled

when you are viewing on a log scale.

9.15

Second Y Axis

The secondary Y axis located on the right hand side of the graph can be used to

display either the pressure taken from the internal pressure sensor or the gas
temperature. The axis is linear and auto-scaling. To select the mode of the
secondary axis select the ‘View’ menu followed by ‘Second axis display’. Choose

from ‘None’, ‘Temperature’ or ‘Pressure’.

9.16

Loading an Old Run

A previously logged data file can be loaded and viewed by selecting ‘Open Data
File’ from the ‘File’ menu and selecting the appropriate TXT or CSV file. A
progress bar is displayed while the data is being imported. Note that very large

data files may take several seconds to load. The data is re-graphed and you can
zoom, label axes, change colours etc., before printing the graph.

9.17

Printing Graphs

You can print the graph at any time by selecting ‘Print Plot’ from the File menu.
This will bring up the printer dialogue box for your specific printer where you can

choose various printing options. Make sure that the printer page is set to
landscape to obtain a full size print out.

9.18

Data Logging in the Background

It is possible to begin data logging and then minimise the windows to continue
working with another application. To minimise the graph simply click on the

minimise button on the blue title bar at the top of the window. You can then use
the ALT + TAB keys to take you to other programmes already running. To return
to the graph simply maximise from the start menu bar or press ALT + TAB again.

If the graph does not redraw immediately select ‘Zoom Full’ from the View menu
to redraw.

9.19

Pausing the Data Logging

You can pause the data-logging at any time during the run by selecting the ‘Data
Logger’ menu and selecting ‘Pause’. Repeat the action and click on ‘Resume’ to
continue, noting that the live graph will draw a straight line between the paused

points to keep continuity of the axes. The clock keeps ticking during the pause
period.

If you decide to access the menu of the Rapidox using the front keypad during

Version 1.6

35

Last printed 16/11/2011 16:59:00

«
...
37
38
39
40
41
...
»

Summary of Contents for Rapidox 1100L


















































Reviews:

No comments