METIS M308 / M309 / M313 / M316 / M318 / M323 / H309 / H316 / H318 (12-pin)
General
4
1
General
1.1
Information to this Manual
This manual is valid for the products listed on the front page, using original parts from Sensortherm.
This manual enables the safe and efficient use with the device. The manual is part of the instrument and
has to be kept in a location where users always have access to.
Read this manual carefully before operating the product. All security notes and operation procedures in
the manuals must be followed to ensure safety.
Additionally the local accident
prevention regulations and common safety regulations of the instruments’
operational area are valid.
The descriptions may differ from the current delivery status, since the pyrometer is continuously devel-
oped. Illustrations in this manual are for basic understanding and can differ from the actual construction.
1.2
CE Conformity and Standards
The product conforms to the following standards:
CE conformity:
DIN EN 61326-1 (electromagnetic compatibility)
Laser safety:
IEC 60825-1, laser class 2 (only devices equipped with laser targeting light)
RoHS:
2011/65/EU
1.3
Limitation of Liability
All information and notes in this manual are made under consideration of valid standards and rules,
state of technology and our expert knowledge for many years.
The producer assume no liability for damages due to:
Non-observance of this manual
Usage out of intended use
Assignment of unskilled personnel
Unauthorized modifications
Technical modifications
Usage of spare parts not approved
The responsibilities of the delivery contract are valid as well as our general terms and conditions and
terms of delivery and the valid statutory rule at date of the conclusion of contract.
1.3.1 Devices with PID controller
The PID controller is designed for temperature control in a variety of applications and has been tested in
these applications over a long period for our satisfaction; especially in fast processes. However, Sensor-
therm doesn’t guarantee that the temperature control meets all the desired requirements over all pro-
cesses. Sensortherm excludes process responsibility.
1.4
Terms of Warranty
A warranty period is 24 months from date of shipment form the Sensortherm facility. The seller will re-
pair or replace the device at its own discretion. Further claims of the buyer against the seller or its
agents are excluded, especially claims for damages that are not incurred in the delivery itself. This shall
not apply in cases of intent, gross negligence, or the absence of assured properties. Damage or misuse
of the product will be determined and void the warranty coverage. Repairs paid by the customer will in-
clude a 180 days warranty from date of shipment. Transportation costs are to be paid by the customer.
Any claims for damage caused by misuse, neglect or tampering with the sensor are excluded.