Sensors & Software Noggin 100, User Manual, Page: 91 / 162

Noggin 13-Survey & Map Mode
77
13.1.4 File Management
The File Management menu allows the user to create GPR Project (GPZ) and Google Earth
(KMZ) files from the collected project and grid data, delete data from the DVL and copy data from
the internal DVL memory to the removable Compact Flash drive.
13.1.5 Run without Saving Data
This option allows the user to go straight into data acquisition. This feature is to allow a “quick
look” at the data in the area. The data collected when in this mode are NOT saved and cannot be
reviewed later or exported. Data that scrolls off the edge of the screen is gone and cannot be
reviewed.
If a GPS receiver is attached to the DVL, GPS information can be logged to a file even when the
Noggin data are not being saved (
13.3.5: p.112 ).
13.1.6 Utilities
This menu has utility programs to:
a) Change the Date and Time on the DVL ( 13.5.1: p.120 )
b) Calibrate the odometer (see 13.5.2: p.120 ),
c) List or print or transfer system information to assist Sensors & Software in
troubleshooting problems with your system ( 13.5.3: p.121 ) and
d) Determine how much space is left on the DVL ( 13.5.4: p.121 ).
13.1.7 Set Storage Drive
This setting controls how data are saved on the DVL. The available options are:
1) Internal: If this setting is selected, the data are saved to the internal memory in the
DVL.
2) Removable: If this setting is selected, the data are saved to the removable compact
flash drive accessible by opening the door at the top of the DVL ( Figure 10-1 ).
13.1.8 Return
This button will return the user to main menu.