MT4061E Rev.2
15/10/2019
Pagina 36 di 45
pressing ENT one starts the printout of the system detector list with all the programming
data (Zone, detector description, Alarm levels etc.).
ABORT PRINT
To stop and cancel the printout
SET PRINTER MODE (Users level “M” and “E”)
This parameter is used to select the print mode.
ON REQUEST
In this case, the control panel only prints specific details (Event Log, detector list etc.) at
the user’s request, in the different menu. The printer can be connected and
disconnected at any time as required.
REAL TIME
This option switches the printer to on-line mode and requires that a printer be
continuously connected to the system. Events are printed as and when they occur.
NOTE: If Real Time is enabled, the event log and other options will not be printed at the
user’s request. The Real Time parameter must be disabled to permit all other print
option to operate.
Fig. 4.5.3) Set Printer Mode option
3.5.4)
SYSTEM INFO
At any user level, selecting SYSTEM INFO a window will show the information about
the hardware and the software versions:
