Sensitech LTE CAT-M/2G User Manual Download Page 4

 

 

 
© SENSITECH INC. 

 

Page  4  of  10

 

T11012860 User Manual 

 

 

 

1. 

Introduction 

1.1. 

Purpose 

This document describes the usage of a TEMPTALE GEO/VIZCOMM VIEW- LTE/LTE 
EXTENDED, ULTRA/ ULTRA EXTENDED, ULTRA DRY ICE/ ULTRA DRY ICE EXTENDED 
device. 

1.2. 

Scope 

The intended audience is a valued customer. 

1.3. 

Description 

LTE  CAT-M/2G  Air  Probe  Temperature  Tracker,  Extended/LTE  CAT-M/2G  Temperature 
Tracker,  Extended/LTE  CAT-M/2G  Air  Temperature  Tracker,  Extend  is  a  LTE-M/2G  GSM 
Quad band tracking device, and sensor data logger designed for the transportation industry. 
It  is  primarily  intended  to  be  used  as  a  real  time  position-monitoring  device,  which  will  also 
produce accurate temperature and humidity. Specific variants of the device also uses various 
sensors to detect when the aircraft has taken off and when it has landed to disable/enable the 
cellular modem.   

The following is a brief summary of its features: 

1.  LTE-M/2G GSM Quad Band 

2.  Internal battery 

3.  Accelerometer (optional) 

4.  Temperature Sensor 

5.  Humidity Sensor 

6.  Light Sensor 

7.  Pressure Sensor (optional) 

8.  NFC for secondary download (optional) 

9.  Dry Ice Probe (optional) 

10.  User Interface 

 

Manufacturer Information 

Company Name: SENSITECH Inc. 

Address: 800 Cummings Center, Beverly, MA USA 

 

Importer Information : PENDING 

Company Name: XXXXXXXXXX 

Address: XXXXXXXXXXXXX 

 

Summary of Contents for LTE CAT-M/2G











Reviews: