Quick-Start Instructions
HINT:
Always start VMD in a gas free
environment.
IMPORTANT:
Follow your company’s
calibration requirements.
Attach the GPS antenna to the connection
labeled “GPS” on the bottom of the tablet.
Attach the Bluetooth antenna to the center
connection on the top of the tablet.
Insert the tablet power harness into the bottom
of the tablet and the opposite end into a 12
volt jack on the vehicle.
WARNINGS:
For best results, clean the
lenses each day prior to use.
Use extreme caution when monitoring the
computer when driving. Any adjustments
should be made only when the vehicle is safely
stopped and away from traffic.
When not in use, refer to transport position
recommendation in the user manual to prevent
potential damage.
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
MADE IN THE USA
WITH GLOBALLY SOURCED COMPONENTS
Distributed by:
851 Transport Drive
Valparaiso, IN 46383-8432
Phone: 219 465 2700
Web: www.gasleaksensors.com
Innovative Detection Solutions
