Quick-Start Instructions
IMPORTANT:
After testing flue samples
it may be necessary to remove condensate
collected in the water/particle filter that is
included with the probe.
WARNINGS:
To prevent ignition of flammable or
combustible atmospheres, disconnect power
before servicing.
Always change batteries in an environment
free of combustible gases.
Do not handle the steel portion of any hot
air probe during or too soon after sampling.
It will become hot and retain heat and burns
may occur!
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
MADE IN THE USA
WITH GLOBALLY SOURCED COMPONENTS
Distributed by:
851 Transport Drive
Valparaiso, IN 46383-8432
Phone: 219 465 2700
Web: www.gasleaksensors.com
Innovative Detection Solutions
