IMPORTANT:
please read these instructions before commencing installation and retain for future reference.
INSTALLATION
INSTRUCTIONS
1 x VIVA MULTI LED
FLEXIBLE STRIP
CODE: SE10615C0/W0, SE10625C0/W0, SE10645C
0
/
W0
Safety instructions
1. Before commencing installation or maintenance, isolate
the main electrical supply for the appropriate circuit at the
fuse board.
2. This product is only suitable for connecting to a 240V 50Hz
supply with use of a 24V driver.
3. The light should be mounted onto a secure surface.
4. Never exceed the total output of the LED Driver you are using.
5. Suitable for furniture lighting.
6. When the lamp expires the fitting must be replaced.
7. Class III safety extra low voltage (SELV).
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed out wheelie bin
symbol, indicates that this product may not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic waste.
Please read these instructions carefully before attempting to
install this product. It is advisable to keep these instructions in a
safe place for further reference.
We recommend that you consult a qualified electrician.
All electrical installations must be carried out in accordance
with current IEE wiring regulations (BS7671).
These products must not be modified, if any modifications are
made it may invalidate the warranty and may render the
product unsafe. These LED lights operate low voltage (24V).
•
Do not wire the individual LED light fittings directly to the
mains. This product is for indoor use only. The silicone
coated part of the fitting is IP54 rated so is protected
against dust and splashing water.
• Install on smooth flat surface(s) only
• Make sure that the appropriate LED driver is used with this
flexible strip.
• The SE10314 driver connection lead is required to use
this
product.
Components
Tools Required
Important safety information
Scissors
6mm Drill Bit
Power Drill
Fitting Instructions
1x Flexible Strip
1 x End cap
