8
SMARTWITNESS KP2 USER GUIDE
3. BLUETOOTH
®
PANIC BUTTON
Please get in touch with SmartWitness or your supplier to buy a Bluetooth panic button
for your KP2.
Enable Pairing
To enable Bluetooth pairing for your panic button, set Bluetooth Panic as “Flic“
in your KP2 Configuration Tool. Your Bluetooth panic button won’t work if
you don’t turn this setting on.
How to Pair With the KP2
Red
LED = Warning,
Blue
LED = Record,
Green
LED = Pairing Confirmation
1. Press
BT button
.
2. Warning and Record lights will blink, entering pairing mode.
3. Press the
Flic BT button
, and wait for a second.
4. The Pairing Confirmation light will blink.
5. Warning and Record will change to the previous mode.
4. SUPERCAPACITOR (EMERGENCY POWER)
When device power is interrupted, your KP2 creates the last recording using
a built-in supercapacitor.
KEY
FUNCTIONS
