Tourguide 2020-D | 127
Operation
Changing the sensitivity of the bodypack transmitter’s line
input
To adjust the sensitivity of the line input to match the connected audio source:
Make sure that the line input is switched on (see previous section)�
Connect the external audio source, switch it on and start playback�
Press the
SET
button
10
�
The operating menu appears and the first menu item „
CHAN
“ flashes on the
display�
Repeatedly press the
▲
/
▼
rocker button
9
until „
SENSIT
“ flashes on the dis-
play and the
LINE
level display
5
appears�
Press the
SET
button
10
�
The current input sensitivity and the
LINE
level display
5
appear on the dis-
play�
Press the
▲
/
▼
rocker button
9
to change the input sensitivity so that the
LINE
level display
5
shows full deflection during the loudest passages, but
the yellow LED
PEAK
8
does not light up permanently�
Press the
SET
button
10
to permanently store the setting�
„
STORED
“ briefly appears on the display, indicating that the sensitivity of the
line input has been stored�
LINE
CH 03
MIC
10
9
8
Changing the sensitivity of the bodypack transmitter’s
microphone input
To adjust the sensitivity of the microphone input to match the connected micro-
phone:
Connect the microphone, position it correctly (refer to the microphone’s in-
struction manual) and speak into the microphone as usual�
Press the
SET
button
10
�
The operating menu appears and the first menu item „
CHAN
“ flashes on the
display�
Repeatedly press the
▲
/
▼
rocker button
9
until „
SENSIT
“ flashes on the dis-
play and the
MIC
Level display
4
appears�
Press the
SET
button
10
�
EN
DE
FR
IT
ES
NL
COMPLIANCE