88 | Tourguide 2020-D
The operating controls
Indications and displays on the bodypack trans-
mitter
Operation and battery status indication
The red LED
LOW BATT
/
MUTE
7
provides information on the current operating
state of the bodypack transmitter:
7
Red LED off:
The bodypack transmitter is switched on and the capacity of the batteries/
BA 2015 accupack is sufficient�
Red LED flashing:
The batteries are/the BA 2015 accupack is going flat (
LOW BATT
)�
In addition, the 4-step battery status display
3
on the display panel provides
information on the remaining battery/BA 2015 accupack capacity:
3 segments
capacity approx� 100%
2 segments
capacity approx� 70%
1 segments
capacity approx� 30%
Battery icon flashing
LOW BATT
LINE
CH 03
MIC
AF peak indication
The yellow LED
PEAK
8
lights up when the transmitter’s audio input is over-
modulated�
If the transmitter’s audio input level is excessively high, the sound of the
receivers may be distorted� In order to avoid distortion in the receivers, reduce
the sensitivity of the transmitter’s line and/or microphone input (see „Chang-
ing the sensitivity of the bodypack transmitter’s line input“ on page 127 and
„Changing the sensitivity of the bodypack transmitter’s microphone input“ on