Sennheiser SpeechLine Page 151 Manual Download

Page: 151 / 214

The SL Boundary 114-S DW

150

The SL Boundary 114-S DW

The wireless SL Boundary 114-S DW boundary microphone is

designed for your speech.
Because it is completely cable free, the SL Boundary 114-S DW

is extremely versatile and suited for a wide range of applica

tions.
The SL Boundary 114-S DW can be charged either wirelessly or

via USB. The CHG 2W wireless charging base for two mobile

devices is available separately. The SL Boundary 114-S DW is

delivered with a rechargeable battery that lasts up to 10 hours.
The Sennheiser Control Cockpit software can be used to mon

itor and control the wireless boundary microphone remotely.

Return to first page of the instruction manual

Summary of Contents for SpeechLine























































































































































































































Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands

Sennheiser SpeechLine, Manual

Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands