SL MCR DW
80
Connecting the receiver
The receiver can output analog and digital audio signals.
The analog audio signal is output via the 3-pin
Analog Out
terminal.
Digital audio signals are output via the
Dante
interface with two RJ-45
sockets. This interface is also used for control and configuration via the
network and for
Power over Ethernet
supply.
The following variants are possible:
►
To configure the variants you need the
Audinate Dante Controller
PoE /
network control
digital audio
PoE /
network control
digital audio
digital audio
PoE /
network control
digital audio
Variant 1
Single Cable Mode (default)
Variant 2
Audio Redundancy Mode
Variant 3
Split Mode
daisy chain
