manualshive.com logo in svg

Sennheiser SKM 5200-II, Instruction Manual

Share
Download
Sennheiser SKM 5200-II Instruction Manual Download Page 10

9

Putting the radio microphone into operation

Putting the radio microphone into 
operation

Inserting, removing and changing the 
power pack

For powering the radio microphone, you can either use the Sennheiser
B 5000-2 battery box (1.5 V AA size batteries) or the rechargeable
Sennheiser BA 5000-2 battery pack. For regular use, we recommend using
the environmentally friendly rechargeable BA 5000-2 battery pack.

Inserting the power pack

Removing the power pack

For battery pack operation of the radio microphone, only use the
BA 5000-2 battery pack in order to ensure optimum operational
reliability. Batteries and rechargeable battery cells have different
discharging curves. The radio microphone is able to identify the
BA 5000-2 battery pack and to use its capacity to the full. Individual
rechargeable battery cells in the B 5000-2 battery box will not be
identified as battery packs.

Open the locking mechanism

 

by

moving it in the direction of the arrow.

Insert the power pack into the radio
microphone.

Push the power pack towards the
microphone head.

Close the locking mechanism

 by

moving it in the direction of the arrow.

Open the locking mechanism

 by

moving it in the direction of the arrow.

Push the power pack towards the
antenna. 
You can now remove the power pack.

Summary of Contents for SKM 5200-II






































Reviews:

No comments

Brands by name

Popular brands

Load more brands