Using the Set 860
Set 860 | 23
Adjusting the balance
The balance buttons allow for left/right volume adjustment. Adjust
the balance so that you hear equally well with both ears.
왘
Press the balance button
R
(right) or
L
(left) on the transmitter
to gradually increase or reduce the volume for your right or left
ear.
When the minimum or maximum balance setting is reached, you
hear a beep via the receiver.
To reset the balance setting to the middle setting:
왘
Simultaneously press the balance buttons
R
(right) and
L
(left)
on the transmitter for 3 seconds.
The balance setting is stored on the stethoset receiver. If you
are using several receivers with a transmitter, the respective
receivers are optimally adjusted to match the personal hear-
ing preferences of the users (e.g. you and your partner).
Please note that the personal hearing preferences can only be
adjusted when only stethoset receiver is connected to the
transmitter.
You can switch your headphone system from stereo to mono
in order to be able to hear all details on either the right or left
ear (see page 30).
To prevent accidental adjustment of the balance settings, you
can activate the settings protection function (see page 33).
BALANCE
L
3s
