Putting the Set 860 into operation
Set 860 | 11
Connecting the transmitter to an audio source
You can connect the transmitter either to a digital or an analog
audio source (e.g. a TV and a stereo hi-fi system).
If you connect an audio source to
both
inputs (digital and analog),
only the analog audio source will be reproduced.
왘
Switch your audio source off before connecting the transmitter.
왘
Check the connection possibilities of your audio source (audio
output, usually marked “OUT”).
왘
Select the corresponding connection cable and, if necessary, a
suitable adapter
왘
To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the follow-
ing chapters). Follow the color codings on the transmitter and on
the cables.
You can also refer to the beginner’s video guides on how to
connect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos.
Connection possibilities of the
audio source
Color coding
on the
transmitter
Connection cable
Page
Optical (digital)
Optical
digital cable
3.5 mm jack socket
(analog)
Stereo audio cable
RCA (analog)
Stereo audio cable with RCA adapter
(3.5 mm jack socket to 2 RCA plugs;
optional accessory)
SCART (analog)
Stereo audio cable with SCART
adapter (3.5 mm jack socket to
SCART connector; optional acces-
sory)
A
B
C
D
Accessories and adapters are available from your local Senn-
heiser partner.
