Cat. No. 005276
ME 102/104/105 System
Microphones |
Back-Electret Condenser Microphone
Modular Mini-Microphone System
General Description
The ME 102/104/105 modular mini-microphone system fulfils profes-
sional demands for sound quality and rugged handling, and is suitable
for all areas of live work where a small and unobtrusive microphone is
needed for vocal and speech applications. Scratch-resistant matt finish:
anthracite or nickel.
Modules available for the ME 102/104/105 system
Cat. No.
j
Microphone capsules including windshields
(available in anthracite / nickel)
ME 102 (+ MZW 102)
003876 / 003838
ME 104 (+ MZW 104)
004227 / 004228
ME 105 (+ MZW 104)
005301 / 005302
j
Copper wire cables (available in anthracite / grey)
KA 100-4
004233 / 004234
KA 100-1083
004399 / 004401
KA 100-60
004237 / 004238
KA 100-P
004241 / 004242
KA 100-5
004245 / 004246
KA 100-2R
004229 / 004230
j
Steel wire cables (available in anthracite / beige)
KA 100 S-4
004235 / 004236
KA 100 S-1083
004402 / 004403
KA 100 S-60
004239 / 004240
KA 100 S-P
004243 / 004244
KA 100 S-5
004247 / 004248
KA 100 S-2R
004231 / 004232
j
MZ 100 accessory set
004226
consisting of: 2 MZQ 102 (anthracite and grey)
2 MZQ 02 (anthracite and nickel)
2 ZH 100 (anthracite and beige)
1 carrying case
j
MZM 2 / MZM 10 magnetic mount set
001866
Technical Data ME 102/ME 104/ME 105
Pick-up pattern
ME 102...................................................................... omni-directional
ME 104..................................................................................... cardioid
ME 105..........................................................................super-cardioid
Frequency response
ME 102............................................................ 40 – 20,000 Hz ± 3dB
ME 104/ME 105 ..........................................100 – 20,000 Hz ± 3dB
Sensitivity (free field, no load) (1 kHz)
ME 102................................................................. 10 mV/Pa ± 2.5 dB
ME 104.................................................................... 8 mV/Pa ± 2.5 dB
ME 105................................................................ 1.6 mV/Pa ± 2.5 dB
Nominal impedance
ME 102/ME 104 ........................................................................... 1 k
Ω
ME 105........................................................................................ 800
Ω
Min. terminating impedance ..................................................4.7 k
Ω
Equivalent noise level ME 102
A-weighted (DIN IEC 651)........................................................ 21 dB
CCIR-weighted (CCIR 468-3).................................................... 33 dB
Equivalent noise level ME 104
A-weighted (DIN IEC 651)........................................................ 30 dB
CCIR-weighted (CCIR 468-3).................................................... 38 dB
Equivalent noise level ME 105
A-weighted (DIN IEC 651)........................................................ 31 dB
CCIR-weighted (CCIR 468-3).................................................... 41 dB
Max. SPL (1 kHz)
ME 102................................................................127 dB (THD = 1 %)
ME 104/ME 105 ................................................133 dB (THD = 1 %)
Supply current ..........................................................approx. 250 µA
Dimensions .....................................................................Ø 6 x 12 mm
Weight (without cable)................................................................. 1 g
Frequency response ME 102
Frequency response ME 104/ME 105
ME 104
ME 102
ME 105
