42 |
LSP 500 PRO
The operating menu
Display brightness
To adjust the display brightness:
X
In the
SETTINGS
menu, turn the
MENU
jog dial until the
DISPLAY BRIGHTNESS
menu item is displayed.
X
Press the
MENU
jog dial to open the
DISPLAY BRIGHTNESS
menu item.
X
Turn the
MENU
jog dial to adjust the display brightness.
X
Press the
MENU
jog dial to store your setting.
WLAN
To be able to operate the LSP 500 PRO from a tablet with the “LSP 500 PRO” app
in a wireless network, you first have to open the
WLAN
menu and connect the
LSP 500 PRO to the wireless network to which you also connect your tablet. For
information on how to operate the LSP 500 PRO via a tablet, refer to page 23.
Important information on WLAN operation
In order for you to be able to operate the LSP 500 PRO in a wireless network,
the following requirements have to be met. If you have questions, contact your
network administrator.
Only unencrypted networks or networks with WPA2 encryption are supported.
Only networks in the 2.4 GHz band are supported (802.11b/g).
The following address and port must be enabled on the network:
• Multicast address 239.255.12.42:1234
• Port 0xD011 (53265)
Basic changes to the WLAN settings of the LSP 500 PRO require a restart of
the WLAN module of the LSP 500 PRO. This can take up to 30 seconds.
A list of compatible access points can be found on the LSP 500 PRO product
page at en-de.sennheiser.com/lsp-500-pro
Settings
Menu
Display Brightness
Settings
Menu
WLAN
