Sennheiser L 1039-10, Instruction Manual

Page: 8 / 14

L 1039-10 | 7
Putting the charger into operation
Connecting the charger to and disconnecting it from the
mains
To connect the charger to the mains and switch it on:
왘
Connect the hollow jack plug of the of the NT 12-50C mains unit to the hollow
jack socket
6
of the charger.
왘
Pass the cable of the mains unit through the cable grip
5
as shown.
왘
Connect the mains cable (EU, UK or US version) to the mains unit and to a wall
socket.
All status LEDs
3
and
8
light up for a brief moment. The charger is switched on
and in standby mode.
To switch the charger off and disconnect it from the mains:
왘
Pull out the mains plug from the wall socket.
NT 12-50C
EU
UK
US
6
5