Cat No. 003374
HME 25-1
Headsets |
Communications Headset
General Description
The HME 25-1 headset features dynamic, closed headphones and a broad-
cast quality MKE 2 Red Dot omni-directional close-talk microphone. It has
been designed specifically for use in noisy environments. Background
noise attenuation is achieved by the extreme closeness of the micro-
phone to the mouth. In addition, omni-directional microphones do not
suffer from increased low frequencies (proximity effect) and so give a
natural sound at close talking distances.
Features
j
Broadcast quality microphone with superb transmission qualities
due to extremely flat frequency response
j
Very light
j
Two-piece padded headband, exceptionally comfortable
j
Microphone can be worn on either left or right-hand side
j
Delivery includes: 1 HME 25-1
1 MZW 1410 windshield
Recommended Accessories
j
Velour ear pads (1 pair)
Cat. No. 069417
j
HZP 25 hygiene pads
Cat. No. 077900
Replacement Parts
j
Ear pads (1 pair)
Cat. No. 040179
j
MZW 1410 windshield
Cat. No. 028718
Technical Data
Headphones
Transducer principle..............................................................dynamic
Ear coupling .........................................................supra-aural, closed
Frequency response ................................................. 30 – 16,000 Hz
Characteristic SPL .......................... 102 dB ± 3 dB at 1 kHz, 1 mW
Nominal impedance .................................................. 600
Ω
per side
Load rating............................................................................. 200 mW
THD ................................................................................................0.5 %
Contact pressure ..........................................................approx. 3.3 N
Weight (without cable)..............................................approx. 190 g
Microphone
Transducer principle................................. back-electret condenser
microphone capsule
Frequency response ................................................. 40 – 20,000 Hz
Pick-up pattern ....................................................... omni-directional
Sensitivity (free field, no load, 1 kHz)...........................6.7 mV/Pa
Min. terminating impedance ..................................................4.7 k
Ω
Operating voltage............................................................ 5 – 15 V DC
Connections
Connection cable............................1.8 m, steel cable, open-ended
Microphone Pick-up Pattern
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
dB
180
∞
150
∞
120
∞
90
∞
60
∞
30
∞
0
∞
0
5
10
15
20
25
30
∞
60
∞
90
∞
120
∞
150
∞
Microphone frequency response (near field)
measured with B&K 4227 artificial mouth (94 dB SPL, distance of 6 mm)
