Sennheiser HDR 195, Instruction Manual, Page: 30 / 38

Cleaning and maintaining the RS 195
28 | RS 195
Cleaning and maintaining the RS 195
To clean the wireless headphone system:
왘
Switch your wireless headphone system off and disconnect the trans-
mitter from the AC wall outlet before cleaning.
왘
Clean the product only with a soft, dry cloth.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to time.
Spare ear pads are available at your local Sennheiser partner.
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups and dispose of them properly.
3 Hook the new ear pads onto the ear cups. Observe the L (left) and
R (right) markings on the rear of the ear pads.
4 Twist the ear pads clockwise until you hear a click sound. Ensure that
they are lock firmly onto the ear cups.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and
damage the electronics.
왘
Keep all liquids far away from the product.
왘
Do not use any cleansing agents or solvents.
3 4 2 1