22
Putting the products into operation
Putting the bodypack transmitter into operation
Removing/inserting the batteries or the optional accupack
You can power the bodypack transmitter with the supplied B 30 battery box
and two 1.5 V AA size batteries.
If you use the supplied B 30 battery box to power the bodypack transmitter:
왘
Insert the batteries into the B 30 battery box.
Please observe correct polarity when inserting the batteries.
To remove the battery box or the accupack:
왘
Simultaneously press the two catches and pull the battery box or the accu-
pack away from the bodypack transmitter.
To insert the battery box or the accupack:
왘
Slide the battery box or the accupack onto the bodypack transmitter as
shown.
The battery box or the accupack locks into place with an audible click.
Attaching the bodypack transmitter to clothing
You can use the belt clip to attach the bodypack transmitter to clothing (e.g.
belt, waistband).
Connecting the clip-on microphone or the headset microphone to the
bodypack transmitter
Only connect the clip-on microphone or the headset microphone recom-
mended by Sennheiser. These microphones are optimized for the bodypack
transmitter.
왘
Connect the jack plug of the clip-on microphone or the headset microphone
to the 3.5 mm jack socket (
Mic/Line
) of the bodypack transmitter.
왘
Lock the jack plug by screwing down the coupling ring.
Optionally, you can also use the Sennheiser BA 30 accupack (3.6 V). The
accupack must be charged before first time use. The accupack can
remain in the bodypack transmitter for charging.
Summary of Contents for evolution D1
Page 1: ...System Manual ...
Page 2: ...2 ...
