ADAPT 660
Bluetooth
®
headset
Getting started
10
Using the audio cable
Use the audio cable for media playback when the battery is low or when Bluetooth transmission is restricted or not allowed.
Bluetooth immediately turns off once the audio cable is connected to the headset.
X
Insert the small jack plug into the audio socket of the
headset.
Bluetooth is deactivated.
X
Connect the 3.5 mm jack plug to the audio output of
your mobile device.
To disconnect the audio cable:
X
Pull the plug out of the headset and your mobile device.
The headset automatically tries to connect to available
paired Bluetooth devices.
i
You can use the Active Noise Cancellation (ANC) as usual (see page 14).
Using the USB cable
Use the USB cable for calls via softphone or media playback via USB and charging.
EPOS ADAPT 660
X
Connect the supplied USB cable to the USB socket of the headset and a USB socket of your computer.
The battery is being charged – see page 22.
X
Click the Audio icon on your PC and select EPOS ADAPT 660.