Sennheiser EM 500, Instruction Manual

Page: 22 / 64

Using the receiver
21
To completely switch the receiver off :
왘
Disconnect the receiver from the mains by unplugging the mains unit
from the wall socket.
The backlighting of the
STANDBY button goes off.
Monitoring the audio signal via headphones
왘
Set the headphone volume control to the minimum position.
왘
Connect headphones with a ¼” (6.3 mm) stereo jack plug to the head-
phone output
.
왘
Gradually increase the volume and monitor the audio signal with the
lowest possible volume.
왘
Keep the STANDBY button pressed until “ OFF ” appears on
the display panel.
The receiver switches to standby mode.
When in the operating menu, pressing the STANDBY button will
cancel your entry (ESC function) and return you to the current
standard display.
The STANDBY button is backlit in red both during operation and
in standby mode.
CAUTION! Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent
hearing defects.
왘
Set the headphone volume control to the minimum position before
putting the headphones on.
542.625
SKM500
ew500 G3
B.Ch: 20.30
EQ
+ 12dB P
MHz
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
P