Product overview
12
Command display (status display of the audio outputs AF and
Command)
The command display is only available with the EM 3732 COM-II twin
receiver.
Besides the two audio outputs
the EM 3732 COM-II twin receiver
also features the two command outputs
Via the “
Command
” menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is avail-
able at only one of the outputs or at both (see “Configuring the audio
outputs of the EM 3732 COM-II” on page 33).
The command display
shows the audio output at which the trans-
mitter’s audio signal is available.
When “
AF
” lights up brightly, the audio signal is available at the audio
output
and/or
.
When “
AF
” does not appear, the audio signal is
not
issued on the audio
output
and/or
.
When “
COM
” lights up brightly, the audio signal is available at the
command output
When “
COM
” does not appear, the audio signal is
not
issued on the
command output
Display for the compander system
Depending on the selected compander system, either “
HDP
” for
HiDyn
plus
™ or “
HDX
” is shown on the display.
LEDs for booster supply of antenna inputs
The LEDs for booster supply of antenna input A
and/or B
light up
when:
• the booster supply voltage is applied to the corresponding antenna
input A
and/or B
The LEDs for booster supply of antenna input A
and/or B
go off
when:
• the booster supply voltage for the corresponding antenna input A
and/or B
is switched off or
• the booster supply voltage is short-circuited or overloaded.
COM
AF
J
K
L
M
AF
COM
HD
X
HD
P
N O P Q R S