Sennheiser EM 100 G4 Instruction Manual Download Page 22

Page: 22 / 129

Installing the EM 100 G4

Connecting/disconnecting the EM 100 G4 to/from
the power supply system

Only use the supplied power supply unit. It is designed for your receiver
and ensures safe operation.

To connect the EM 100 G4 to the power supply system:

▷

Insert the plug of the power supply unit into the

DC IN

socket of the re-

ceiver.

▷

Pass the cable of the power supply unit through the cable grip.

▷

Slide the supplied country adapter onto the power supply unit.

▷

Plug the power supply unit into the wall socket.

To completely disconnect the EM 100 G4 from the power supply system:

▷

Unplug the power supply unit from the wall socket.

▷

Unplug the power supply unit from the

DC IN

socket of the receiver.

Summary of Contents for EM 100 G4


































































































































Search results

Summary of Contents for EM 100 G4

Reviews:

Related manuals for EM 100 G4

Brands by name

Popular brands

Sennheiser EM 100 G4, Instruction Manual

Search results

Summary of Contents for EM 100 G4

Reviews:

Related manuals for EM 100 G4

Brands by name

Popular brands