Sennheiser EM 100 G3, Manual

Page: 20 / 30

Adjustment tips
18
Adjustment tips
The operating menu allows you to make settings for your receiver and your transmitters.
The standard displays “
Guitar Tuner ” and “ Soundcheck ” can be called up by pressing the
UP / DOWN , without having to get into the operating menu.
Standard displays with additional functions
Tuning a guitar (for SK transmitters only)
왘
Activate the “ Guitar Tuner ” standard display via the operating menu.
왘
Connect a guitar to your SK transmitter.
왘
Change to the “ Guitar Tuner ” standard display (see page 15).
왘
Tune your guitar.
The receiver automatically recognizes the pitch of the plucked string.
Doing a soundcheck
By doing a soundcheck, you can check the reception area for field strength gaps (“dropouts”)
which cannot be compensated for by the receiver’s diversity circuitry. You can do the sound-
check without the help of another person.
왘
Switch the transmitter on.
Extended menu “Advanced Menu”
Tune
Sets the receiving frequencies for the frequency bank “ U ”
Special function: Sets a channel and a receiving frequency for the frequency bank “ U ”:
왘
Select this menu item and call it up by pressing the SET button
쐏
until the channel selection
appears.
Guitar Tuner Selects the mode of the guitar tuner function
Pilot Tone Activates/deactivates the pilot tone evaluation
LCD Contrast Adjusts the contrast of the display panel
Reset Resets the receiver
Software
Revision
Displays the current software revision
Exit Exits the extended menu “ Advanced Menu ” and returns to the main menu
Display Function of the menu item
PEAK
-10
0 40
25
10 -20
-30
AF RF
543.200
ew100 G3
1. 1
MUTE
MHz
“Guitar Tuner”
standard display
“Receiver Parameters”
standard display
440 Hz
MUTE
PEAK
-10
0 40
25
10 -20
-30
AF RF
P