Sennheiser EM 100 G3, Manual

Page: 19 / 30

Using the operating menu
17
Display Function of the menu item
Main menu “Menu”
Squelch
Adjusts the squelch threshold
Adjustment range: 5 dB
μ
V (“ Low ”), 15 dB
μ
V (“ Middle ”), 25 dB
μ
V (“ High ”), can be switched off
Special function (for servicing purposes only):
With the squelch threshold set to “ Low ” , you switch the squelch off by keeping the DOWN
쐄
pres-
sed for 3 seconds. If you then press the UP button
쐄
, you switch the squelch on again.
Easy Setup Scans for unused frequency presets, releases and selects frequency presets
Frequency
Preset
Changes the frequency bank and the channel
Name Enters a freely selectable name
AF Out
Adjusts the audio output level
Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps, 6 dB gain reserve
Special function “gain reserve”:
왘
When you have adjusted a level of +18 dB, press the UP button
쐄
until the next higher value
appears.
AutoLock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu “ Advanced Menu ”
Exit Exits the operating menu and returns to the current standard display
Submenu “Easy Setup”
Reset List Releases all locked frequency presets and selects an unused frequency preset
Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits the submenu “ Easy Setup ” and returns to the main menu
CAUTION! Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a very low
value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing damage or overload the
loudspeakers of your system!
왘
Always make sure that the squelch is switched on (see above).
왘
Before adjusting the squelch threshold, set the volume of the audio out-
put level to the minimum.
왘
Never change the squelch threshold during a live transmission.