Sennheiser EM 100 G3, Manual

Page: 16 / 30

Using the receiver
14
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “ Auto Lock ” menu item. If the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the receiver:
The lock mode icon
햺
flashes prior to the lock mode being activated again.
Muting the audio signal
To mute the audio signal:
To unmute the audio signal:
왘
Press the SET button.
“ Locked ” appears on the display panel.
왘
Press the UP / DOWN button.
“ Unlock? ” appears on the display panel.
왘
Press the SET button.
The lock mode is temporarily deactivated:
SET
SET
When you are in the operating menu
The lock mode is deactivated as long as you are in the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
왘
When one of the standard displays is shown on the display panel, press the
STANDBY button.
“ RX Mute On? ” appears on the display panel.
왘
Press the SET button.
The audio signal is muted.
왘
Press the STANDBY button.
“ RX Mute Off? ” appears on the display panel.
왘
Press the SET button.
The muting is canceled.
533.875
ew100 G3
20.12
MHz
햺
P
PEAK
-10
0 40
25
10
-20
-30
AF RF
SET
SET