Synchronizing devices
91
Synchronizing devices
You can synchronize ew IEM G4 series transmitters and receivers via the
transmitter’s and receiver’s infrared interfaces.
The
Easy Setup Sync
function makes it possible to transfer unused fre-
quency presets from your EK IEM G4 receiver to multiple transmitters via
the infrared interface after you have performed a frequency preset scan
with this receiver. The next unused channel in the receiver’s current fre-
quency bank is transferred to your transmitter.
Vice versa, you can use the
Sync
function to configure the settings for your
EK IEM G4 portable receiver directly on your stationary SR IEM G4 trans-
mitter and transfer them to the receivers via the infrared interface.
Easy Setup Sync-function (EK IEM G4 -> SR IEM G4) for a single radio link
▷
Switch your stationary transmitter and your mobile receivers on.
▷
Call up the
Easy Setup
menu item on the transmitter.
▷
Choose the
Mute RF For Only This Device?
option.
The
SYNC
display appears in the transmitter display panel and the blue
LED on the infrared interface lights up.
▷
Perform a frequency preset scan with your EK IEM G4 mobile receiver
(see “Easy Setup menu item”) and select a frequency bank with suffi-
cient unused frequencies.
▷
Hold the infra-red interface of the receiver in front of the infra-red in-
terface of the first transmitter.
Summary of Contents for EK IEM G4
Page 108: ...107 Block diagram AC 41 ...