Using the SR IEM G4
74
Configuring the audio channels (mono/stereo)
You can configure audio channels in the “Mode menu item”. You can select
either
Stereo
or
Mono
:
▷
Select
Stereo
when you want to send a separate audio signal on chan-
nel I and channel II (e.g. channel I = audio signal of the moderator/mu-
sician, channel II = sum of all audio signals).
The moderator/musician then has the option to adjust the volume dis-
tribution on his or her receiver as needed.
In Stereo mode, you can receive the two input signals either as a
mixed mono signal or as a stereo signal. To do so, you must select Fo-
cus or Stereo mode on the EK IEM G4 receiver. See “Mode menu
►
▷
Select
Mono
when you only want to transmit one channel. The signal of
the left audio input
BAL AF IN L
is used.
►
In Mono mode, you have to deactivate the pilot tone evaluation on
your EK IEM G4 receiver. This is the only way to ensure that your re-
ceivers will transmit the same signal on channel I and channel II.
Summary of Contents for EK IEM G4
Page 108: ...107 Block diagram AC 41 ...
