Using the EK IEM G4
55
Reset
▷
Select
Reset List
to delete the list of unused frequencies.
Performing multi-channel frequency setup
As an alternative to the following procedure, multi-channel frequency
setup can also be performed using the
Sennheiser Wireless Sys-
tems Manager (WSM)
software. For more information about con-
trolling devices via the
Sennheiser Wireless Systems Manager (WSM)
software, refer to the instruction manual for the software. You can down-
load the software here:
To perform the automatic frequency setup for multiple radio links simulta-
neously:
▷
Connect all of the
SR IEM G4
transmitters to one network using a net-
work switch. See “Creating a data network”.
The automatic frequency setup function only works for transmitters in
the same frequency range. Transmitters in a different frequency range
are not included.
▷
Please note that all transmitters must be in the same
IP address range
.
• The IP addresses can be
automatically
assigned if there is a DHCP
server in the network.
• If there is no DHCP server in the network, the IP addresses must be
assigned
manually
. See “Advanced > IP Address menu item”.
• Assign the IP addresses for all transmitters in the
192.168.x.x
range
(the link-local range
169.254.x.x
is also a possible alternative).
Summary of Contents for EK IEM G4
Page 108: ...107 Block diagram AC 41 ...
