manualshive.com logo in svg

Sennheiser EK 500 G4, Instruction Manual, Page: 56 / 132

Share
Download
Sennheiser EK 500 G4 Instruction Manual Download Page 56

Using the EK 500 G4

55

Frequency Preset menu item

In the 

Frequency Preset

 menu item, you can adjust the receiving frequen-

cy of the receiver by adjusting the frequency bank and the channel.

To open the 

Frequency Preset

 menu item:

▷

On the home screen, press the 

SET

 button to open the operating menu.

▷

Press the 

UP

 or 

DOWN

 button until the 

Frequency Preset

 menu item

appears in the selection frame.

▷

Press the 

SET

 button to open the menu item.

▷

Adjust the settings as desired.

►

▷

Press the 

SET

 button to save the changes you made to the settings.

or

▷

Press the 

ON/OFF

 button to cancel the entry without saving the set-

tings.

Name menu item

In the 

Name

 menu item you can enter a name for the radio link. 

To open the 

Name

 menu item:

▷

On the home screen, press the 

SET

 button to open the operating menu.

▷

Press the 

UP

 or 

DOWN

 button until the 

Name

 menu item appears in the

selection frame.

▷

Press the 

SET

 button to open the menu item.

▷

Adjust the settings as desired.

►

▷

Press the 

SET

 button to save the changes you made to the settings.

or

▷

Press the 

ON/OFF

 button to cancel the entry without saving the set-

tings.

Summary of Contents for EK 500 G4





































































































































Reviews:

No comments