Sennheiser EK 500 G4 Instruction Manual Download Page 44

Page: 44 / 132

Using the EK 500 G4

Lock-off function

You can set the automatic lock-off function in the

Auto lock

menu (see

When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.

To temporarily deactivate the lock-off function:

▷

Press the

SET

button.

Locked

appears in the display panel.

▷

Press the

DOWN

button.

Unlock?

appears in the display panel.

▷

Press the

SET

button.

Lock-off function is now temporarily deactivated.

When you are in the operating menu

>> Lock-off function is deactivated long enough for you to work in the op-
erating menu.

When one of the standard displays is shown

>> Lock-off function is automatically activated after 10 seconds.

The lock-off function icon flashes while lock-off function is being activated
again.

Summary of Contents for EK 500 G4





































































































































Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands

Sennheiser EK 500 G4, Instruction Manual

Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands