Sennheiser EK 500 G4 Instruction Manual Download Page 30

Page: 30 / 132

Installing the SK 500 G4

These sections contain detailed information about installing and starting
up the SK 500 G4.

You can find information about operating the SK 500 G4 under “Using the
SK 500 G4”.

Inserting and removing the batteries/rechargeable
batteries

You can operate the bodypack transmitter either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.

▷

Press the two catches and open the battery compartment cover.

▷

Insert the batteries or the rechargeable battery as shown below. Please
observe correct polarity when inserting the batteries.

►

▷

Close the battery compartment.

The cover locks into place with an audible click.

Summary of Contents for EK 500 G4





































































































































Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands

Sennheiser EK 500 G4, Instruction Manual

Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands