Sennheiser Digital 9000, Instruction Manual

Page: 104 / 130

102 | Digital 9000
Using the L 60
Connecting the mains unit and switching on the L 60
왘
Connect the DC connector of the NT 3-1 mains unit to the DC input
socket
2
of the L 60 charger.
왘
Connect the mains plug (EU, UK or US version) of the mains unit to the
mains.
The charger switches on and goes to standby mode.
Switching off the L 60 and disconnecting it from the mains
If no accupacks are inserted into the L 60, the charger is in standby mode.
To switch off the charger and the NT 3-1 mains unit and to disconnect
them from the mains:
왘
Unplug the mains plug of the mains unit.
Charging the BA 60/BA 61 accupack
왘
Charge the BA 60/BA 61 accupack fully before using it for the first time
or if you have not used it for an extended period of time.
The L 60 charger allows you to simultaneously charge ...
... 2 BA 60 or
... 2 BA 61 or
... 1 BA 60 and 1 BA 61.
왘
Insert the accupack into one of the charging compartments
3
and
make sure that it locks into place with an audible click.
NT 3-1
EU
UK
US
2
BA 60
1
3
BA 61
1
3