manualshive.com logo in svg

Sennheiser AMBEO, Instruction Manual, Page: 27 / 55

Share
Download
Sennheiser AMBEO Instruction Manual Download Page 27

Putting the AMBEO Soundbar into operation

AMBEO Soundbar  |  27

Putting the AMBEO Soundbar into 
operation

Preparing the SB01-RC remote control

To remove the transport protection of the battery:

▷

Use a suitable object (e.g. a coin) to open the battery compart-
ment cover (located on the bottom side of the remote control) by

 

turning one turn counter-clockwise.

▷

Remove the plastic strip.

▷

Close the battery compartment cover by turning one turn clock-
wise.

Connecting/disconnecting the Soundbar 
to/from the power supply system

CAUTION

Danger of damage to the product!

If you connect to an unsuitable power supply, the product can be

 

damaged.

▷

Use a suitable power cable to connect the product to the power 
supply system (100 - 240 V~, 50/60 Hz).

Connecting the Soundbar to the power supply system

▷

Connect the plug of the power cable to the 

POWER

 socket on the

 

Soundbar.

▷

Connect the power plug of the power cable to a suitable wall 
socket.

Summary of Contents for AMBEO
























































Reviews:

No comments