![background image](http://html1.mh-extra.com/html/sennheiser/adn-cu1/adn-cu1_instruction-manual_1239911016.webp)
Setting up the conference system
14 |
ADN CU1
Setting up a small wired conference system with only
the central unit
For a small wired conference system, you do not require ADN PS power supplies.
Connecting conference units connected in a cable string to the ADN CU1
central unit
The following describes how to connect one cable string to the ADN CU1 central
unit. If necessary, repeat these steps for a second cable string.
왘
Use a system cable to connect the
PORT II
socket
or
PORT I
socket
of the
ADN CU1 central unit to the
IN
socket
of the first conference unit.
왘
Use a system cable to connect the
OUT
socket
of the first conference unit to
the
IN
socket
of the second conference unit.
왘
Repeat these steps for additional conference units.
왘
If necessary, repeat all steps for a second cable string.
Please note that there is a limited number of approx. 15-20 conference
units per cable string due to the voltage drop on the cable string (see
page 7).
You can use optional cable holders for guiding the system cables. For
detailed information, refer to the ADN system manual.
8
9
<
A
<
IN OUT
IN OUT
IN OUT
PORT II PORT I
ADN CU1
ADN D1/ADN C1
PORT I
PORT II
IN OUT
IN OUT
IN OUT
IN OUT
IN OUT
IN OUT
ADN CU1
IN –– AUDIO –– OUT
PORT II PORT I
100-240V~
50/60Hz 240W
2x 52.8V
1.75A
8
9
IN
N
O
O
OU
UT
IN
N
O
O
OU
UT
IN
N
O
O
OU
UT
IN
N
O
O
OU
UT
IN
N
O
O
OU
UT
IN
N
O
O
OU
UT
20
1
2
...
20
1
2
...
< A
Summary of Contents for ADN CU1
Page 1: ...Instruction manual Control Unit ADN CU1 ...
Page 2: ......