7 - EN
WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ...........................7
SAFETY INSTRUCTIONS...................................................8
KNOW YOUR UNIT............................................................13
SPECIFICATIONS*............................................................13
ASSEMBLY.........................................................................13
OIL AND FUEL...................................................................14
OPERATION.......................................................................15
MAINTENANCE..................................................................17
TROUBLESHOOTING.......................................................20
PARTS................................................................................21
WARRANTY.......................................................................23
SAFETY & INTERNATIONAL
SYMBOLS
Explanation of Safety & international symbols describes
safety and international symbols and pictographs that may
appear on this product. Read the operator’s manual for
complete safety, assembly, operating and maintenance and
repair information.
This graphic accompanied by the words
WARNING, DANGER OR CAUTION calls
attention to an act of a condition which can
lead to SERIOUS INJURY.
Read the operator’s manual(s) and follow all
warnings and safety instructions. Failure to do
so can result in serious injury to the operator
and/or bystanders.
Always wear eye protection, ear protection and
head protection meeting ANSI Z87.1 standards.
Wear gloves.
Wear foot protection.
Beware of foot injury by cutting attachment.
Keep 15 meters or 50 feet away from any other
person
.
Beware of objects flung by cutting
attachments.
Never use without properly
mounted protection
guard.
Beware of objects flung by cutting
attachments.
Never use without properly mounted protection
guard.
Don’t install or use any type of blade on the unit
displaying this symbol.
Bystander sound pressure level: 75dB(A).
Maximum permitted revolutions of the cutting
head.
Maximum permitted revolutions of the blade.
75dB(A)
MEASURED AT 50FT. (15M)
PER ANSI B175.3
5700
5700
Summary of Contents for GTBCU4QL-M
Page 84: ......
