Senix GTBCU4QL-M, Operator'S Manual

Page: 13 / 84

13 - EN
WWW.SENIXTOOLS.COM
off, make sure the cutting
attachment has stopped before
the unit is set down.
RESIDUAL RISKS
WARNING!
Even when the unit is used as
prescribed it is not possible to
eliminate all residual risk factors.
The following hazards may arise
in connection with the unit’s
construction and design:
• Damage to lungs if an effective
dust mask is not worn.
• Damage to hearing if effective
hearing protection is not worn.
• Health defects resulting from
vibration emission if the unit is
being used over long periods of
time or not adequately managed
and properly maintained.
WARNING!
This unit produces an
electromagnetic field during
operation. This field may, under
some circumstances, interfere with
active or passive medical implants.
To reduce the risk of serious or fatal
injury, we recommend persons with
medical implants to consult their
physician and the medical implant
manufacturer before operating this
unit.
ADDITONAL SAFETY WARNING
FOR BRUSH CUTTER
1. Take not of all warnings and
instructions relating to operating
and fitting the blade.
2. The blade can recoil suddenly
from objects if it cannot cut or
mow through them.This can
cause injuries to the arms or
legs.
3. Keep bystanders and animals
at least 15 meters or 50 feet
away from where you are
working. If the equipment strikes
a foreign body, stop the engine
immediately and wait for the
blade to come to a standstill.
Check the blade for signs of
damage. Always replace the
blade if it is bent or cracked.
4. The blade is liable to catapult
away objects with high force.
This can cause blindness or
injuries. Wear protection on your
eyes, face and legs. Always
remove objects from your
working area before you use the
blade.
5. If you are approached, stop the
engine and cutting attachment.
In the case of bladed units,
there is the added risk of injury
to bystanders from being struck
with the moving blade in the