EN - 10
WWW.SENIXTOOLS.COM
each use. Remove all objects
such as rocks, broken glass,
nails, wire, or string, which can
be thrown or become entangled
in the cutting attachment. Clear
the area of children, bystanders
and pets. At a minimum, keep
all children, bystanders and pets
outside a 15 m (50 ft) radius;
outside the 15 m (50 ft) zone,
there is still a risk of injury from
thrown objects. Bystanders
should be encouraged to wear
eye protection.
18. Never leave the unit unattended
while the engine is running.
19. Do not use this unit for any job
other than those for which it is
intended as described in this
manual.
20. Maintain firm footing and
balance. Do not over-reach.
Keep cutting attachment below
waist level. Maintain all parts of
your body away from the rotating
cutting attachment and hot
surfaces.
21. Do not use this type of unit for
sweeping away debris.
22. Use nylon cutting head which
is free of damage. If a stone
or any other obstacle is hit,
stop the engine and check the
nylon cutting head. A broken or
unbalanced nylon cutting head
must never be used.
23. FOLLOW INSTRUCTIONS for
assembling and operation.
24. Do not store the unit in a closed
area where fuel vapors can
reach an open flame from hot
water heaters, furnaces, etc.
Store in a locked, well ventilated
area only.
25. Ensure safe and proper
performance of your unit. Please
only use original accessories.
The use of any other
accessories or attachments
may cause a potential hazard or
injury to the user, damage to the
unit, and void the warranty.
26. If the unit will not be used for
a long time, clean the unit
completely, especially the fuel/oil
tank, its surroundings, and the
air filter.
27. When refueling, stop the engine
and confirm that it is cooled
down. Never refuel when the
engine is running or hot. When
gasoline spills, be sure to wipe
it up completely and dispose of
those materials before starting
the engine.
28. Mix and pour fuel outdoors
where there are no sparks and
flames. Slowly remove the fuel
Summary of Contents for GTBCU4QL-M
Page 84: ......
