Installation Instructions for the Digital-Clock AMC-40xx
Page 2 of 2
Setting of summer- / wintertime parameter
The summer- / wintertime settings are due to legal provisions, but can be changed in case of a possible change of these times. You get
to the operation mode for summertime by pressing the
‘+’
button during normal operation mode. Now the clock shows
'So:'
for
summertime
und either
'On'
(automatic change over for summer- / wintertime) or
'OF'
(no automatic change over). You can change
between
'On'
and
'OF'
with the button
‘+’.
In the position
'OF'
the clock returns to normal operation mode after pressing the button
‘S’.
If
you change to position
'On'
you can enter the data for the beginning and ending of the summertime after pressing the button
‘S’.
Or if
you press
‘S’
a few times it will return to the standard settings. Therefore the button
‘S’
must be pressed as long as the normal operation
mode will appear on the display again (4 times).
Setting of beginning / end of summertime
Change over of the time takes place always on Sundays, so that only the two months and the equivalent Sundays must be set. First,
summertime start-dates will be asked for. The clock displays the start month as number: the month is blinking and can be set with the
button
‘+’
between 1 and 12. You can change to the equivalent Sunday with the button
‘S’.
Again you can now choose with
‘+’
between
the numbers
1 to 4
and
'L'
. The numbers
1 to
4
represent the different Sundays of the month and
'L'
represents the last Sunday during
one month. Please press the button
‘S’
in order to finish your entries.
Now you can enter the data for the end of summertime exactly with
the same method. After termination of all settings please press
‘S’
again
in order to return the clock to normal operation mode. All
settings are now stored.
For Germany the last Sunday in March is pre-set from our factory as the beginning of summertime and
the last Sunday in October is pre-set as it´s end.
Batteries
The clock has four AA batteries. In order to remove the cover of the battery compartment please press it slightly inward above the word
`press´
and then draw it off downwards. If you replace batteries please replace them all together at once.
External connection for DCF-radio receiver:
A DCF-Antenna can also be connected to the backside of the clock. Therefore please set the equivalent Dip-Switches as shown below:
Setting of the Dip-Switches on the backside
Language settings for displaying the weekdays by Dip-Switch 1, 2 und 3
Displays in
bold letters
are set ex-works.
Day parts displayed in relation to the time
00:00 – 05:59
Night
06:00 – 08:59
Morning
09:00 – 10:59
Pre-noon
11:00 – 12:59
Noon
13:00 – 17:59
Afternoon
18:00 – 21:59
Evening
22:00 – 23:59
Night
If you have any question regarding installation, please do not hesitate to contact us: +49 (0)202-2641722.
We will be happy to provide you with help.
DIP-Switch
ON
OFF
1,2,3
Language selection for weekdays, please see below schedule
4
Date: TT.MM.JJJJ
Date: TT, month full written text
5
Upper line indicates the time
Upper line indicates the weekday
6
Lower line indicates the day parts
Lower line indicates the date
7,8
Please use internal DCF-Antenna
Please use external DCF-Antenna
DIP-Switch 1
DIP-Switch 2
DIP-Switch 3
Language
Off
Off
Off
German
On
Off
Off
English
Off
On
Off
Dutch
On
On
Off
French
Off
Off
On
Spanish
On
Off
On
Polish
Off
On
On
Turkish
On
On
On
Italian
ON
OFF
ON
Dip-Switch
M
S
back side
1
10
connection panel
