MI00369-3-EN
ENGLISH6/8
Factor IP address
The default module IP address is static: 192.168.90.101
Web Server
To access the maintenance Web Server with 192.168.90.101 factory IP address
(Default user: admin; Default password: admin)
http://192.168.90.101/maintenance/index.html
To access the custom Web Server on SD card with 192.168.90.101 default IP address
http://192.168.90.101/index.html
SW1 DIP-switch settings to upload factory settings
This procedure restores the IP address to factory settings: 192.168.90.101 and
Webserver/FTP server user login credentials: admin and password: admin.
KEY
Turn off the Z-KEY module and set all eight SW1 DIP-switches
ON
.
Turn on the Z-KEY module and wait 10 seconds.
Turn off the Z-KEY module and set all eight SW1 DIP-switches
OFF
.
ON
OFF
SW2 DIP-switch settings
RS232 or RS485 settings on terminals 10-11-12 (serial port 2)
KEY
RS232
ON
RS485
OFF
7 INDICATIONS VIA LED ON FRONT PANEL
LED
STATUS
LED meaning
TX1 (Red)
Flashing
Data transmission on port #1 RS485
RX1 (Red)
Flashing
Data receipt on port #1 RS485
TX2 (Red)
Flashing
Data transmission on port #2 RS485
RX2 (Red)
Flashing
Data receipt on port #2 RS485
PWR (Green)
On
Device powered
SD (Red)
Flashing
Access to micro SD card.
ETH ACT (Green)
Flashing
Packet transmission on Ethernet port
ETH ACT (Green)
On
No activity on Ethernet port
ETH LNK (Yellow)
On
Ethernet port connected
ETH LNK (Yellow)
Off
No Ethernet connection
8 ACCESSORIES
CODE
DESCRIPTION
Z-PC-DINAL2-17.5
Support with power terminal 2 slots pitch 0 1705 mm
Z-PC-DIN1-35
1 slot support for rear connector pitch = 35 mm
Z-PC-DIN4-35
4 slot support for rear connector pitch = 35 mm
CE-RJ45-RJ45-R
1.5 m Ethernet cable
CS-DB9M-MEF-1012
Z-KEY / RS232-DB9 serial connection cable
KIT-USB
Programming KIT (USB + CD cable)
MICRO-SD 4GB-MP
4GN Micro-SD Flash card
Summary of Contents for Z-KEY
Page 8: ...MI00369 3 EN ENGLISH8 8 ...
