User Manual
Z-SG2 / Z-SG2-L
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI-005370-EN
Rev. 6
Page 32
The test will continue to request registers via Modbus and it will be possible to send commands using the
appropriate commands.
It is also possible to calibrate the cell or start the data logger.
THE DATA LOGGER
10.3.1.
The data logger can be used to acquire data that can be used with external software (e.g. Microsoft Excel™).
The sample acquisition time can be set (minimum 1 second).
The data logger will create a text file in a standard .csv format.
CALIBRATION OF THE LOAD CELL WITH THE EASY SETUP SOFTWARE
11.
In the Calibration section of the configuration test it is possible to easily calibrate a load cell.
From the main menu press the
button to enter the configuration test, now select the Cell
calibration tab:
FACTORY CELL CALIBRATION
11.1.
When factory calibrating the cell it is not necessary to use a sample weight for calibration. The data that are
always required for calibration are:
-Cell sensitivity
-Cell full scale
Now you can choose how to acquire the tare choosing between:
