Seneca S6001-RTU, User Manual

Page: 100 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
100
In this page, you can set the parameters related to the OPC Unified Architecture (OPC UA), as listed in the
following table:
Field Meaning Default value
Enable Enable or not OFF
Port The server port to use 4840
Username The username provided with the service
subscription
empty
Password The password provided with the service
subscription
empty
Shared Memory Select which shared memory must
access with the OPC-UA protocol.
Z-NET
Note that for access the server with a OPC UA client you must use the following url:
opc.tcp://IP_ADDR:PORT/
where:
IP_ADDR is the actual IP address
PORT is the configured port for the OPC UA server
18.1.7 Users Configuration
By clicking on the “Users Configuration” link, in the “General Configuration” menu, you come to the
following page: