Interface:
The physical interface to associate the VLAN with.
VLAN id:
The VLAN id (1-4095)
IP address:
The IP address of the interface.
Netmask:
The Netmask of the interface.
Gateway:
The Gateway of the interface.
Description:
A user given description of the interface.
Note that editing VLANs should not require a reboot to take effect.
6.10.7
Setup — VBC
The VideoBRIDGE Controller can automatically detect the 10G Probe and add it to the VBC equipment
list, provided that the auto-detect functionality is enabled and the VBC server address is known to the
VB330. Note that the network must be transparent to traffic between the VBC server and 10G Probes for
auto-detection to work.
The VBC server’s host name may be typed in the VBC server address field. The IP address associated
with the DNS name will be displayed. If host name lookup fails, it is necessary to type the VBC server’s
IP address. Host name lookup is only performed if auto-detect is enabled.
When changes have been made in the
Setup — VBC
view, click the
Apply
button for changes to take
effect.
VB3xx 10G Probe User’s Manual version 5.3
169
Summary of Contents for VB330
