SCP 2100
– User Manual
Page 24 (62)
Figure 9: Input and Failover Configuration Menu
Setting
Range
Description
Primary Input
ASI, MPEG/IP, 8VSB or None
(dependent upon unit
configuration)
Used for both normal operation and input
failover settings. During normal operation,
this input will be the active input.
Backup Input
ASI, MPEG/IP, 8VSB or None
(dependent upon unit
configuration)
During failover operation this input will
become the active input. The catalyst for
the unit to switch to this input is configured
in the following setting.
Switch On
Manual Only
Sync Loss
(dependent upon unit
configuration)
Manual Only
: the unit will not switch inputs
automatically. The user must manually
switch inputs.
Sync Loss
: the SCP 2100 will switch from
the primary to the backup input if the
primary stream loses synchronization for
the duration of the Switchover Interval.
Restore On
Manual Only
Primary Input Restored
Backup Input Sync Loss
(dependent upon unit
configuration)
Manual Only
: the unit will not restore to the
primary input automatically. The user must
manually switch inputs.
Primary Input Restored
: the SCP 2100
restores to primary when the Primary input
regains transport stream synchronization.
Backup Input Sync Loss
: the unit will switch
from backup to primary when the backup
stream loses synchronization for the
duration of the Switchover interval.
