Sencore OmniHub-PLAY, User Manual, Page: 9 / 70

– User Manual
Page 9 of 70
Section 1 Overview
1.1 Product Overview
OmniHub-PLAY is a compact, highly integrated, and flexible solution that can provide
high-quality live video and VOD content for end users via IP network. With embedded
Android-based APK, it supports up to 50 live SD/HD programs, third-party VOD systems
and 500 terminals. Equipped with ample function modules, OmniHub-Play can also
provide a customized welcome page, OSD message, organization introduction,
advertisements, and other value-added services. With the popularity of IP network,
OmniHub-Play now is widely used in hotels, hospitals, schools, communities, yachts,
and other areas where the streaming of live or VOD content is required via IP Network.
OmniHub-Play have 2 hardware models (OmniHub-Play100 and OmniHub-Play200).
The main difference between these 2 models is the placement of the Ethernet port. For
simple setup, OmniHub-Play100 has the Ethernet ports on the front of the unit where
you need to check the physical connection every now and then, while OmniHub-Play200
has the Ethernet ports at the back, making the Ethernet cable more secure. Both models
have the same User Interface for configuration.
1.2 Front Panel Overview
OmniHub-PLAY is a 1RU Server with 2 hardware models namely OmniHub-PLAY100
and OmniHub-Play200. See pictures below for the differences of the two hardware.
OmniHub-PLAY100
1. Console: Server NIC, used to remotely connect to the Server BIOS system
(for technicians)
2. USB interface*2
1 2
3