Sencore OmniHub-PLAY, User Manual, Page: 13 / 70

– User Manual
Page 13 of 70
Section 3 Web Interface Operation
3.1 OmniHub-PLAY Web Interface Overview
3.1.1 Connecting to the Management Port
OmniHub-PLAY has multiple Ethernet ports, with which you can access the
management interface of the device. There are six (6) ports tagged with ETH0, ETH1,
ETH2, ETH3, ETH4 and ETH5. You can see the labels on the front panel of OmniHub-
PLAY100. For OmniHub-PLAY200, the six ports (ETH0 to ETH5) are placed at the back
on the unit from left to right.
3.1.2 Login to the OmniHub-PLAY Web Interface
To enter the OmniHub-PLAY web interface, use one of the following supported browsers
and navigate to the unit’s IP address:
 Firefox

Google Chrome
OmniHub-PLAY has six (6) Ethernet ports where you can log in and access the
management interface. Factory network settings of management port are:
 IP address: 192.168. 1 .201 Gateway:192.168. 1 .254 for ETH0
 IP address: 192.168. 2 .201 Gateway:192.168. 2 .254 for ETH1
 IP address: 192.168. 3 .201 Gateway:192.168. 3 .254 for ETH2
 IP address: 192.168. 4 .201 Gateway:192.168. 4 .254 for ETH3
 IP address: 192.168. 5 .201 Gateway:192.168. 5 .254 for ETH4
 IP address: 192.168. 6 .201 Gateway:192.168. 6 .254for ETH5
 Subnet Mask: 255.255.255.0
You can connect to any port and type the corresponding IP address to log in to the web
interface. The default
username/password
are
admin/admin
. Click the login button to
access the web interface.